MP1802B 13 Pin Car and Trailer Tester
MP1802B 13 Pin Car and Trailer Tester
- 13 Pin car and trailer tester is suitable for testing ISO 11446/13 pin lighting & 12V power supply circuits
- LED indicators clearly show any faults
- Suitable for testing LED & filament bulb trailer lighting
- Requires 1 x 9V PP3 battery (not included)
- Notes & instructions for use:
- The yellow button on the side must be depressed and held down to test a function. Releasing the button ends the test
- LED indicators will show green when function is tested and correctly wired, or red if a fault is present
- 12V power supplies can only be tested on the towbar side
- Towbar testing requires vehicle ignition to be switched on and each function activated in turn
- Only for use with 13 pin plugs and sockets.
- Can be used in conjunction with a suitable adaptor (eg; MP6005 or MP6015) to test 7pin/ISO1724 lighting circuits
- Do not check towbar and trailer functions at the same time