MP556 Argon/CO2 Cylinder

MP556 Argon/CO2 Cylinder for welding stainless steel and mild steel. Suitable for most makes of mini MIG’s.

Disposable Gas cylinders are ideal when portability is essential or gas usage is low, and are suitable for most makes of mini MIG’s
Only available in case quantity of 12
ARGON/CO² mix cylinder for welding stainless steel and mild steel.
Welding duration approx. 20 minutes.
ARGON/CO² mixtures will usually require lower power settings and give a steadier arc and smoother weld appearance than CO². Therefore better performance is available from most machines when using ARGON / CO² gas.
Delivered by pallet only
Tare weight: 1140g
Volume: 950cc
Contents: 60lt
Test Pressure: PH 165 bar

MP556 Argon/CO2 Cylinder – Instructions for use

Remove the Plastic cap from the top of the cylinder
Screw on the regulator (right hand thread) by hand only, keeping the cylinder upright.
Do not over tighten.
Repeat several times if no gas comes out.
Place cylinder upright in the carrier on machine
Turn regulator off when not in use
Unscrew and remove the pressure regulator when the bottle is empty and dispose the bottle with other ferrous metals
Do not allow any bottle contents to leak into the atmosphere